X-Rite RM61, Руководство пользователя

Страница: 13 / 20

R M 6 1 S P E C T R O P H O T O M E T E R
13
Section 3 - Taking Measurement
You should refer to the documentation for the software program
that you are using with your instrument. All applications that
use the instrument must be running during measurements.
Sample Criteria
The instrument can take measures from just about any clean,
dry surface that is reasonably flat. The instrument shoe should
be able to rest flat and steady on the sample area. If the item
to be measured is smaller than the shoe, you may want to
make a platform—at the same height as the item—for the rest
of the instrument’s shoe to sit on.
NOTE: Never measure wet paint. Wet paint will contaminate the
instrument.
Measurement Techniques
The following information is provided to familiarize you with
“mechanical” aspects of taking a measurement.
1.
Clear the sample surface of any dirt, dust, or moisture.
2.
Position the target window over the sample to measure. If
possible, place the entire instrument on the sample.
Sample
Target Window