X-Rite RM61, Руководство пользователя

Страница: 9 / 20

R M 6 1 S P E C T R O P H O T O M E T E R
9
Cable Connections and Charging
The battery pack must be installed before plugging in the AC
adapter.
1.
Close any open software applications and shut down your
computer.
2.
Insert the modular connector from the interface cable into
the I/O port on back of the instrument.
3.
Attach the DB9 connector from the interface cable to an
available I/O port on the computer. Secure with screws.
4.
Plug the small connector from the AC adapter into the
power input connector on the interface cable.
5.
Plug the detachable line cord into the AC adapter and then
plug the line cord into the wall receptacle.
6.
For “initial” remote use, allow the battery pack to charge a
minimum of four (4) hours. If immediate use is required,
the instrument can be operated “tethered” to the AC
adapter during battery charging.
7.
Turn on the computer, run the application and select the
I/O port the instrument is attached to, if applicable.
AC Adapter
Power Input
Modular Connector
To computer
I/O port
To wall
receptacle