X-Rite RapidMatch XI, Руководство пользователя

Страница: 6 / 19

RapidMatch ™ XI Spectrophotometer
6
Battery Lifespan Expectations
•
Lithium-ion batteries typically decay to 80% capacity after 700 charge
cycles. A charge cycle can be defined as several partial charges
equaling 100%. Partial charge and discharge cycles will help maintain
the life of the battery. It is best to avoid full discharge and charge
cycles. After roughly 700 charge cycles are reached, the amount of
measurements you can expect to achieve from one full charge is
reduced. At this point, you may wish to replace the battery pack.
Disposal
•
Dispose of the battery pack in a designated disposal location for
recycling.
6. Connecting the Power Adapter
NOTE: The instrument can operate from the power adapter only. The
battery pack does not need to be installed. The power adapter overrides
any charge condition of the battery pack in the instrument. Measurements
can be taken even with a very low battery condition when using the power
adapter and the battery pack is charging.
1.
Verify the voltage indicated on the power adapter complies with the AC
line voltage in your area.
2.
Open the access cover (1) at the back of the instrument.
3.
Insert the small plug from the power adapter (2) into the input connector
on the instrument.
4.
Plug the detachable line cord in the power adapter and plug the line cord
into the wall receptacle.
Power Adapter Ratings
Input: 100-240V 50-60 Hz and Output: 12VDC @ 2.5A
Operational hazard exists if a power adapter other than the one provided
is used.
(1)
(2)