X-Rite MA94, Руководство пользователя

Страница: 22 / 53

M U L T I - A N G L E S P E C T R O P H O T O M E T E R
20
Exiting Configuration Mode
After configuring options, use the Left navigation button to move the highlight focus to the Main
screen icon in the Main column and press the Select button to exit.
Lamp Selection (MA98 only)
This option is used to select single (default) or dual lamp configuration in the instrument.
Single Lamp – Indicates the 45° lamp is only in use.
Dual Lamp - Indicates both the 45° lamp and 15° lamp are in use.
Measurement Trigger
This option is used to determine which inputs are used to trigger a measurement on the
instrument. The available settings are Pressure (default), Button, Software Only, and Pressure
and Button.
Pressure – Pressure sensors are required to take a measurement.
Button – Measure button is required to take a measurement.
Software Only – No button or pressure sensors are required to take a measurement. This
setting would be selected when software input is used to trigger a measurement.
Pressure and Button – Both the pressure sensors and measure button are required to a take a
measurement.
Pressure Sensor Sensitivity
This option works in conjunction with the pressure sensor measure option, by allowing you
to adjust the amount of pressure required before a reading would occur. The available settings
are Minimum, Light (default) and Normal.
Minimum – A minimal amount of pressure is required to trigger a measurement.
Light – Little pressure is required to trigger a measurement.
Normal – Firmer pressure is required to trigger a measurement. This option would be used when
very precise positioning is always required.
Main screen icon