M A 3 S P E C T R O P H O T O M E T E R
19
APPENDICES
Service Information
X-Rite provides repair service to their customers. Because of the complexity of the circuitry, all warranty and non
warranty repairs should be referred to an authorized service center. For non warranty repairs, the customer shall
pay shipping and repair cost to the authorized service center, and the instrument shall be submitted in the
original carton, as a complete unaltered unit, along with all the supplied accessories.
X-Rite, Incorporated has offices around the world. You can contact us using one of the following methods:
•
To identify the X-Rite service center nearest you, please visit our web site at www.xrite.com.
•
For online help, visit our web site and click the
Support
link.
•
Send an e-mail to Technical Support ([email protected]) detailing your problem and listing your
contact information.
Cleaning the Instrument
The exterior of the instrument may be wiped clean with a cloth dampened in water or mild cleaner.
Important Notes:
•
DO NOT use any solvents to the clean the instrument, this will cause damage to the cover and internal
electronic components.
•
Compressed air should not be used to clean the instrument. Cleaning the instrument with blown air
can cause dirt on the outside of the instrument to enter into the device, and contaminate optical
components.
Cleaning the Calibration Reference
The white tile in the calibration reference should be cleaned using a mild soap and warm water solution,
thoroughly rinsed with warm water, and wiped dry with a clean, lint-free cloth. You must let the reference dry
completely before taking a calibration measurement.
Replacing the Battery Pack
U
se on Li-ion battery pack provided by X-Rite (P/N TPZ-27313); other types may burst causing personal
injury.
NOTE:
Time and date are lost when the battery is disconnected. It is not possible to set the clock in the
Setting menu.
Connect the instrument to the PC and use the utility software or the application software to set time and date.
This information is used for identification of the measurements.
1. Carefully position the instrument on the left side and remove the 2 screws in the base plate using a 2
mm allen key). Compress the cover slightly if the screws do not fall out.
Содержание MA 3
Страница 1: ...MA 3 Spectrophotometer User Guide ...
