X-PROGRAM X-A10, Руководство пользователя

Страница: 2 / 16

The models include the following
features:
- Analogue class AB technique
- High efficiency
- Low profile design
- RCA line inputs
- High level input with Auto start
- Powerful cable terminals
- Built-in active crossovers
Installation
Before you begin installation
Before you begin you need to read the manual, to have
some tools, cables and other material available. There
is one such list of material on the following page.
Amplifier location
Important
Allow air circulation around the amplifier.
2
Disconnect Battery
Before starting the instal-
lation, always disconnect
the negative terminal of
the battery.
The X-program series of amplifiers have a compact
design that allows great flexibility in mounting. You
can mount it under a seat or in the trunk.
When you select a location, do remember that the
amplifier generates a lot of heat.
Choose a location where air can circulate freely
around the amplifier. Do not cover the amplifier with
carpets or hide behind trim panels.
Do not mount the amplifier in an inverted or upside
down position.
X-A10 has a cooling fan built-in, make sure that
the air can circulate freely around the fan opening.
Check all locations and placements carefully before
making any cuts, drilling any holes or making any
connections.
IMPORTANT!
Use the metal screws and the plastic washer
coming with the amplifier when you do the
install. Do not use oversized screws, you may
destroy the plastic ears by doing so.
X-logo on amplifier cooling flange
The X-logo on the amplifier top is attached with
two small screws. The logo can be removed and
twisted 90 or 180 degrees, and then screwed back
in wanted position. The logo can be mounted in
four different ways to match your installation.