10
4. Time-intervals Mode Setting (C)
You can set up ten (10) different time-intervals.
Reach the “Time Interval Mode” (C) and choose one of the numbers
ranging from 0 to 9.
As soon as the Time-Led-Indicator begins to flash, select the interval
you want to set up (throught the Adjustment Buttons 3 and 4).
Set up both parameters: Start and End. Then press “OK” (5) to confirm
the setting.
Choose a new interval and perform the same actions.
Press “Home Button” (6) to return to the main menu.
Make sure that the "Start” and the "End” Leds are both turned on.
5. Temperature Mode Setting (D)
Enter in “Temperature Mode” (D) and press “OK” (5) until when the led
that indicates the degrees (°C), begins to flash.
Program both "Start" and Stop", via the Adjustment Keys (3 and 4).
Always confirm your setup with the “OK Button” (5).
6.Time/Temperature Mode Setting (E)
Enter in "Time/Temperature Mode" (E). Press "OK" (5) and follow the
same adjustment procedure explained in points 4. and 5.
Press "OK" (5) to confirm the setting. After confirming, make sure that
the "Start/End" (upper quadrant) and "Start/Stop" (lower quadrant) indi-
cators are illuminated.
Please note: It is possible to set up 10 different time-intervals and tem-
peratures.
3. Time Setting (C)
Press the “Home Button” (6) to reach “Time-intervals Mode” (C).
Then press “OK” (5) until the Led, that indicates the hour, begins to
flash. Set up the desired time, through the Adjustment Buttons (3 and
4). Then key “OK” (5) to confirm the setting.
Make sure that "Start" and "End" LEDs (in the upper quadrant) are both
turned on.
