Overall dimensions
565X310X280MM
Mounting hole
254x114.3mm,254x194.3mm M10X30 Outside Hexagon
8.8 grade 8 pieces
20000LBS LINE SPEED AND AMP DRAW (FIRST LAYER) 12v
Line Pull
Lbs
NO
LOAD
8000
10000
13000
16000
20000
kgs
3629
4536
5897
7258
9072
Line Speed
ft/min
19.8
11.6
9.7
8.58
6.6
3.96
m/min
6
3.5
2.95
2.6
2
1.2
Motor Current
amps
75
190
260
310
380
465
20000LBS LINE SPEED AND AMP DRAW (FIRST LAYER) 24v
Line Pull
Lbs
NO
LOAD
8000
10000
13000
16000
20000
kgs
3629
4536
5897
7258
9072
Line Speed
ft/min
19.8
11.6
9.7
8.58
6.6
3.96
m/min
6
3.5
2.95
2.6
2
1.2
Motor Current
amps
65
170
230
290
360
410
20000LBS LINE PULL AND CABLE CAPACITY
Layer of cable
1
2
3
4
5
Rated line
pull per layer
Lbs
20000
16000
13000
10000
8000
Kgs
9072
7258
5897
4536
3629
Cumulative
Cable capacity
Ft
16.5
37.3
61
89
99
M
5
11.3
18.5
27
30
Specific Operation Warnings
Read the following carefully before attempting to operate your winch and keep the instructions for future
reference.
1. The uneven spooling of cable, while pulling a load, is not a problem, unless there is a cable pile up on one end of
the drum. If this happens reverse the winch to relieve the load and move your anchor point further to the centre of the
vehicle.
After the job is done you can unspool and rewind for a neat lay of the cable.
2. Store the remote control switch and wireless remote inside your vehicle where it will not become damaged, inspect
it before you plug it in.
3. When ready to begin spooling in, plug in remote control switch with clutch disengaged, do not engage clutch with
motor running.
4. Never connect the hook back to the cable. This causes cable damage. Always use a sling or chain of suitable
strength.
5.Observe your winch while winching, if possible while standing at a safe distance. Stop the winching process every
metre or so to assure the cable is not pulling up in one corner. Jamming the cable can break your winch.
6. Do not attach tow hooks to winch mounting apparatus. They must be attached to vehicle frame.
