background image

5. To commence winching operation, start vehicle engine, select neutral in transmission, maintain engine speed at 

idle. 

 

6. Operate the remote control switch to IN or OUT until the vehicle has been retrieved. Regularly check the winch to 

ensure cable is winding onto the drum evenly. 

 

Note: 

1. Never winch with your vehicle in gear or in park, which would damage your vehicle's transmission. 

2. Never wrap the cable around the object and hook onto the cable itself. This can cause damage to the object being 

pulled, and kink or fray the cable. 

3. Keep hands,clothing,hair and jewellery clear of the drum area and cable when winching. 

4. Never use the winch if the cable is frayed, kinked or damaged. 

5. Never allow anyone to stand near the cable, or in line with the cable behind the winch while it is under power. If the 

cable should slip or brake, it  can suddenly whip back towards the winch, causing a hazard for anyone in the area. 

Always stand well to the side while winding. 

6.Don't leave the switch plugged in and disconnect the power cables when winch is not in use. 

 

 

CHECK THE WINCH CAREFULLY AND THOROUGHLY BEFORE OPERATING! 

SPECIAL INSTRUCTIONS ON AIR COMPRESSOR WINCH SQ10000

 

Please follow the instructions on winch part when using the winch,but remember this:the winch and the air 

compressor cannot work at the same time!Working both of them will cause big electrical current which will probably 

destroy the battery.So it would be the best to use only one at a time,either the winch or the air compressor,but never 

use them both simultaneously.The designed max working pressure for this air compressor is 115PSI.And the 

compressor could inflate  balls,bikes,motorcycles,cars,offroad vehicles, and light trucks  and could work air tools 

too.To achieve better performance,a 5-gallon air tank would help effectively. 

 

Notes: 

1.  Connect the quick connector,air gun and air tank. 

2.  Power on the switch for air compressor 

3.  Work the air compressor,until it shuts off by itself and then use the air gun. 

4.  When you finish the inflating,power off the air compressor.And the air left in the air tube or air tank must be 

deflated thoroughly otherwise great danger will be invited. 

5.  Do not point the air gun at people or animals! 

6.  When air tank is equipped,booster valve could be used to enable the air compressor to be applied more widely. 

 

Maintenance 

It is highly recommended that the winch be used regularly (once a month).Simply power the cable out 15m,free spool   

5m and then power back in .This will keep all components in good working condition so that the winch can be relied 

on when needed. Contact your authorized outlet for technical assistance and repairs. 

 

SPARE PARTS: 

A comprehensive range of spare parts is available. 

Please kindly contact the distributor on the end cover or the local retailer. 

 

NOTE: 

The safety precautions and instructions discussed in this manual can't cover all possible 

Содержание 20805002

















Отзывы: