Assembly Stage #1
1. Fasten front stabilizer (E) to the main frame by using 2 screws (S-10), 2 curve washers (S-1),
and 2 nts (S-2).
2.
Fasten rear stabilizer (F) to the main frame
by using 2 screws (S-10), 2 curve washers (S-1),
and 2 nts (S-2).
3.
After assembly, the Trainer can be adjusted to slightly uneven ground by adjusting the
height of the foot caps at the back. The pre-assembled transportation wheels in the front
allow easy moving of the Elliptical.
S-10
Carriage Bolt M8
B o x S p a n n e r ( 1 )
S-2
Acorn Nut
for M8 Bolt
S-1 Curved washer for
?
8*
?
19*2T bolt(4)
