INSTRUCTION MANUAL OF SM2705-67
BUTTON FUNCTION:
MODE/ENTER
In stop mode, confirm all exercise data setting(Time, DST,CAL, Pulse, etc),
and enter into program.
RESET
Press it in the STOP mode, return to the main menu. Press the mode 2s at
any time, buzzer sound 1s and LCD display 2s then return to the main menu
as “TOTAL RESET”.
START/STOP
To start or stop the system.
RECOVERY
If no pulse input, no use to press the mode. When pulse is displayed, press
it to recovery. It will display F1~F6 after 1minute, press it again to check out.
UP
To select training mode and increase the function or value up.
DOWN
To select training mode and decrease function or value down.
POWER ON
When power on, buzzer sound for 1 second. At the same time, LCD full display 2 seconds and
then wheel diameter.
After that, enter into normal training mode to select.
ENTER TRAINING MODE
When enter into training mde, MANUAL(MAN) flash 1Hz in the dot matrix. Press UP& DOWN to
choose from MANUAL→PROGRAM→User program→H.R.C→WATT. Press ENTER/MODE to
enter the mode. If press START without selection, directly enter into MANUAL MODE and start.
PROGRAM SETTING
In STOP mode, press P1, P2, P3, ~, P12 to enter relevant program accordingly quickly. Or in the
START mode, Select the program under training mode, press UP&DOWN to choose one from
P0, P02, P03, ~, P12.
PROGRAM SETTING LEVEL
Adjust the level in start mode. When using ▲/▼ to adjust, cannot recycle the level(▲can only
increase to Level32, ▼can only decrease to 1).
ADJUSTING MANUAL LEVEL
Adjust the manual level in start mode. Press ▲/▼ to increase or decrease one level. If hold on
for 1.5s, will +/- 2levels per second and stop when releasing.
ADJUST THE VALUE (Eg. TIME, DISTANCE, CALORIES, PULSE etc.)
1. Select TIME, DISTANCE, CALORIES, PULSE in Manual mode. Use ▲/▼ to adjust the
value Recyclely.
2. When in PROGRAM, User program, H.R.C, WATT mode, only can set the time.
3. Use ▲/▼ to increase or decrease one level; Press ▲/▼ for 1.5s, +/- 8 levels per second and
stop when releasing.
H.R.C
If select H.R.C mode, need set age first and confirm by MODE. It will display preset value in
PULSE area according to age. If select TARGET, it will display 100 and flash in PULSE area.
Use ▲/▼ to adjust the target value(30~230) and can be recycle.
User Program
