Wyse V10LE, Руководство администратора, Страница: 49 / 92

Configuring Local Settings Options
43
Printers
The Printer Setup dialog box allows configuration of network printers and local printers
that are connected to the thin client. Through its USB ports, a thin client can support
multiple printers. If more than one printer is to be used and another port is not available on
your thin client and the port that is to be used must be shared with a USB modem
converter, connect a USB hub to the port.
Tip
If required, USB-to-Parallel converter cables are available from Wyse. Port
LPT1 or LPT2 selects the connection to a USB printer or parallel printer
through a USB-to-Parallel cable. For ordering information, refer to the Wyse
Web site at:
http://www.wyse.com/products/accessories/accessories.asp .
Use the following guidelines for the Ports tab:
• Select Port - Select the port you want from the list.
• Printer Name - This is a required entry. If Enable LPD service for the printer is
selected, the printer name becomes the queue name for other clients using LPR to
print to this printer.
• Printer Identification - Enter the type or model of the printer. This name should be
either the device driver name for the printer under the Microsoft Windows system, or a
key to map to the device driver. If not specified, the name will be defaulted to the
printer-supplied identification for standard direct-connected USB printers or
Generic /
Text Only for non-USB connected printers upon connection to Windows hosts. The
driver name mapping takes place either through a printer-mapping file read by the
system as part of the global profile (wnos.ini) or by MetaFrame servers through the
MetaFrame printer configuration file (\winnt\system32\wtsprnt.inf).
Tip
Most USB direct-connected printers or parallel printers connected through
USB-to-parallel cable converters do report their printer identifications. Port
LPT1 or LPT2 selects the connection to a USB printer or parallel printer
through a USB-to-Parallel cable.
• Printer Class - Select the printer class from the list ( PCL5 , PS , or TXT ).
• Enable the printer device - Must be selected to enable the directly-connected printer.