Wyse V10LE, Руководство администратора, Страница: 24 / 92

18
Chapter 3
The Connect Manager command buttons include:
• Connect - To make a connection, select a connection from the list and click Connect .
• New - Clicking New opens the Connection Settings dialog box either directly or
through the Connection Protocol menu selection for creating a new connection
definition (for more information on the
Connection Settings dialog box, refer to
"Advanced Details on Configuring ICA and RDP Connections"). The new
locally-defined connections are added to the connection list. Be aware of the following
information:
• High-privileged user - Typically, all locally-defined connection definitions are
temporary and are lost when the user logs off and when the thin client restarts or is
shut down. However, if configured by an administrator (
enablelocal=yes
),
locally-defined connection definitions can be saved in these cases.
• Stand-alone user - Locally-defined connections are retained when the thin client
restarts or is shut down (there is no individual log-on). Network configuration
settings must be made locally.
• Properties - Clicking Properties opens the Connection Settings dialog box for the
selected connection (for more information on the Connection Settings dialog box,
refer to "Advanced Details on Configuring ICA and RDP Connections"). Be aware of
the following information:
• High-privileged user - Can view and edit the definitions for the currently-selected
connection. Edits are not permanently retained when the user signs-off.
• Low-privileged user - Cannot create or edit connections, but can view connection
definitions.
• Stand-alone user - Can permanently modify the persistent connections (except
when PNAgent/PNLite services are used).
• Sign-off - To sign-off from the thin client, click Sign-off .
• Delete - To delete a connection, select a connection from the list and click Delete .
• Reset VM - To reset a virtual connection, select a virtual connection from the list and
click Reset VM .
• Global Connection Settings - If you do not use INI files to provide global connection
settings, you can click Global Connection Settings to open and use the Global
Connection Settings dialog box to configure settings that affect all of the connections
in the list (see "Manually Configuring Global Connection Settings").