Wyse V10LE, Руководство администратора, Страница: 39 / 92

Configuring Connectivity Options
33
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
Colors - Select the color depth of the RDP session. If High Colors (16 bits) or True
Colors (32 bits) is selected and the RDP server does not support this color depth, the
thin client renegotiates the color depth to the lower value (for example, 256 Colors (8
bits). The highest is 32 bits, if hardware supports it.
Tip
For some thin clients versions, only the 256 Colors (8 bits) selection is
available for RDP connections. Also, for older versions of the server software
(for example, RDP 4.0) the server only supports 8 bit color. This is not
detectable in advance but results in use of 8-bit color when the connection is
established.
• Window mode and Full screen mode - Select the initial view of the application in a
windowed screen or full screen. You can toggle between viewing modes by using
CTRL+ALT+UPARROW.
• Auto-connect on start-up - When selected, automatically connects the session on
start-up.
• Re-connect after disconnect - When selected, causes the thin client to automatically
reconnect to a session after a non-operator-initiated disconnect. If selected, the wait
interval is that set in the
Delay before re-connecting box (enter the number of
seconds 1 to 3600) or the user profile for yes (20 seconds) or seconds . The default is
20 seconds if there is no INI file description of this connection, or is a Stand-alone user,
or is simply omitted.
Tip
You can reset the options on the Connection tab of the Connection Settings
(RDP) dialog box. To do so, click the Reset VM command button. This
command button is located in the upper-right of the dialog box. It appears
only with a VDM broker connection.