Wyse 3230LE, Руководство пользователя

Страница: 14 / 84

xii
Class B
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le
brouillage radioélectrique édicté par le Ministère des Communications du Canada.
IEC/EN Notice
These products conform to the requirements of IEC950 and EN60950.
These products conform to requirements of EN55022 for Class A equipment or EN55022
for Class B equipment (refer to “Terminal Requirements Compliance”).
Models 3320SE, 3350SE, and 3360SE Terminals
For use with External Power Supply DVE Model DSA-0301-05 or certified equivalent
model supplied by the manufacturer, rated minimum 5V/4A.
Models 3200LE and 3230LE Terminals
For use with External Power Supply DVE Model DSA-0151D-12 or certified equivalent
model supplied by the manufacturer, rated minimum 12V/1.5A.
Model 3630LE Terminals
For use with External Power Supply Ilan Model F1650K or certified equivalent model
supplied by the manufacturer, rated minimum 12 V/3.5A.
Noise Suppressor
A noise suppressor (ferrite bead) must be installed on the network cable of your terminal.
This installation is necessary to maintain compliance with U.S. FCC B limits and European
CISPR B EN55022 Class B limits. The noise suppressor is supplied by the manufacturer
and is packed in your terminal’s shipping carton.
Cable Notice
The use of shielded I/O cables is required when connecting this equipment to any and all
optional peripheral or host devices. Failure to do so may cause interference and violate
FCC and international regulations for electromagnetic interference.