6
Technical support: [email protected] EMEA/ROW: +44 (0) 1793 230 343
US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
PANEL DESCRIPTIONS - RECEIVER
Rear
RS232 Port - Matrix only
LAN port
EDID DIP Switch (for manual EDID setting)
24V DC power input
IR Extension port (IR EXT)
UTP Output ports 1-4 (RJ45 Cat5e/6)
IR TX Emitter ports (corresponds to inputs)
Input ports (HDMI)
IR RX Receiver ports (corresponds to outputs)
1
5
4
8
9
2
6
3
7
1
5
9
4
8
2
6
6
3
7
6ii. Panel Description - Receiver
Front
1
4
5
2
3
Receiver Mode
Normal:
unit operation and RS232 control
Update: RS232 firmware update mode used to update the firmware of
the
receiver
Note: When used with the MX-0404-POH-KIT the RS232 port can only be used for
firmware update – serial control of the receiver itself is not possible
Power LED
On:
Receiver powered (either by PoH or mains)
Off: Receiver not powered (no power supply detected)
Status LED
Slow Flashing
: Receiver functioning correctly
Off:
Receiver not functioning correctly – investigation and
troubleshooting
recommended
HDCP LED
On:
HDCP video being transmitted
Rapid Flashing:
Non-HDCP video being transmitted
Link LED
On:
Receiver and matrix linked and transmitting correctly
Off/Blinking:
Connection issues exist between receiver and matrix –
investigation and troubleshooting recommended
1
5
4
2 3
