clino_e.doc
Page 6 of 24 Pages
2 OPERATING
ELEMENTS
2.1 G
ENERAL INFORMATION
– 6 –
INDICATION OF INCLINATION in selected
units
– 1 –
ON/MODE – key
- To switch operating mode on
- To toggle between modes
– 8 –
INTERFACE SOCKET RS485
– 2 –
ENTER/HOLD – key
- Enter key
- key to freeze measurement values
– 3 –
SELECT / PRINT – key
- key to select items
- key to send data to port
Four measuring bases square to each other
KEY ECHO
Visual indication "a key is depressed"
– 5 –
Indication of direction of inclination
– 7 –
Battery indicator
Visible only in case of low battery
– 4 –
Selection pointer for
operation modes
Attention!
Whilst trying out the different functions be careful never to operate the two bottom keys "
ENTER/HOLD"
and "
SELECT/PRINT" simultaneously. This would result in the loss of calibration data. This combination is
protected by an additional safety feature: The two keys must be operated for a period of 10 seconds before this
command is accepted. See 2.10 for information concerning data recovering
