Check that the power LED is not lit Also check that the output voltage is below 24 Volts before beginning If the unit is
subjected to an excessive shock by being dropped or impacted, or if the enclosure is damaged, it should be disconnected and
not used until it has been inspected and repaired by qualified electricians/personnel Check all cables, plugs, and electrical
outlets to be sure that they are not damaged before connecting equipment
Power Source
CHOOSE THE APPROPRIATE AC POWER SOURCE (230V, SINGLE-PHASE, 50/60 HZ) FOR THE INPUT POWER
THIS CONVERTER.
Environment
This converter should only be used in a well ventilated environment which will allow heat to dissipate This will prevent
potentially damaging heat build up internally Do not use in ambient temperatures greater than 105° F (40° C) Keep away
from external heat sources
Keep the converter away from or do not place the converter on top of something that creates excessive vibration
Safety Considerations
Page 4
December 2018
VBR-UM-02429-EN-03
