WARNING
: This product can expose you to chemicals including lead, which are known to the State of California
to cause cancer, and Chromium, which are known to the State of California to cause birth defects and/or other
reproductive harm For more information go to
SCOPE OF THIS MANUAL
This manual describes the operation of the SELECT-Cycle Converter 20 Amp and 30 Amp models A parts list with illustrations
is also included The electronic version of this manual is available on our website at
MPORTANT
I
Read this manual carefully before attempting any installation or operation. Keep the manual in an accessible location for
future reference.
Unpacking and Inspection
Upon opening the shipping container, visually inspect the product and applicable accessories for any physical damage such
as scratches, loose or broken parts, or any other sign of damage that may have occurred during shipment
OTEE:
N
If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the
carrier A claim for equipment damage in transit is the sole responsibility of the purchaser
SAFETY CONSIDERATIONS
Terminology and Symbols
Indicates a hazardous situation, which, if not avoided, is estimated to be capable of causing death or serious
personal injury
Indicates a hazardous situation, which, if not avoided, could result in severe personal injury or death
Indicates a hazardous situation, which, if not avoided, is estimated to be capable of causing minor or
moderate personal injury or damage to property
Safety Rules and Precautionary Measures
Read, understand and follow all of these instructions before using this equipment Death or severe injury could result from
failure to follow the safety rules listed below
Hazardous Voltage
THIS UNIT IS DESIGNED TO PRODUCE HIGH VOLTAGE AND SHOULD BE OPERATED IN A DRY ENVIRONMENT.
NEVER ATTEMPT TO SERVICE WHILE RUNNING. MANY PARTS IN THIS CONVERTER OPERATE AT LINE VOLTAGE. DO NOT
TOUCH. USE ONLY ELECTRICALLY INSULATED TOOLS.
Servicing Information
This equipment should only be serviced by qualified electricians/personnel Additional instructions are located in the Yaskawa
AC Drive-J1000 Manual and must be read and understood before servicing this converter Contact Wyco
(1-800-233-9926) if the above mentioned manual was not included with the order or you can go to
and
download the manual Before servicing or removing the cover, disconnect the power supply Wait 5 minutes before removing
the cover to make sure that the internal components have had time to de-energize/discharge
OTEE:
N
Some components may remain energized/charged even after being unplugged
Scope of This Manual
Page 3
December 2018
VBR-UM-02429-EN-03
