Wybron 87250, Руководство пользователя

Страница: 6 / 29

6
Quick Start
1. Connect the Equipment
A. Attach the Eclipse IT Iris dimmer/dowser to a powered light fixture.
B. Connect the Eclipse to the PS Power Supply using the 4-pin Wybron
power/data cable.
C. Connect the PS Power Supply to non-dimmed 100-240 VAC, 50/60Hz power
and a DMX source.
Optional
D. Connect dimmers that have Infochip installed to the Infogate hardware and
software. Refer to the Infogate and Infochip manuals for details.
E. Using Infogate:
i.
Initiate “Perform Discovery”
ii. In the DMX Map, drag and drop the DMX address for the Eclipse to DMX
address 1.
F. Refer to the Infogate user manual for further details.
2. Send DMX Levels
A. On the lighting console, vary the level of the Eclipse DMX channel to open and close
the dowser fins.
Connection Diagram
Figure 2
Eclipse Iris IT
Connection Diagram
Figure 1
Four Pin
Optional