Würth ASS 18-A EC Combi, Перевод оригинальной инструкции по эксплуатации

Страница: 16 / 199

16
Product Description and Specifications
Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.
Product Features
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Tool holder
2 Locking sleeve
3 Belt clip*
4 Battery pack*
5 Battery unlocking button*
6 Button for electronic speed preselection
7 Speed indication
8 “PowerLight” button
9 Rotational direction switch
10 On/Off switch
11 “PowerLight”
12 Handle (insulated gripping surface)
13 Double bit*
14 Universal bit holder*
15 Screwdriver bit*
16 Application tool (e. g. an impact socket)*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete over-
view of accessories can be found in our accessories pro-
gram.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-2.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95 dB(A); Sound power level
106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-2:
Impact tightening of fasteners of the maximum capacity of the
tool: a
h
=13.5 m/s
2
, K=1.5 m/s
2
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of
exposure.
Cordless Impact Wrench Screw
Driver
ASS 18-A EC
Combi
Art. No. 5700 510 X
Rated voltage V= 18
No-load speed
– Setting 1
– Setting 2
– Setting 3
min
-1
min
-1
min
-1
0 – 1300
0 – 2000
0 – 2800
Impact rate
– Setting 1
– Setting 2
– Setting 3
min
-1
min
-1
min
-1
0 – 1100
0 – 2600
0 – 3200
Maximum torque, hard screw-
driving application according to
ISO 5393
– ¼" hexagon socket
–

½"
Nm
Nm
170
185
Bolt size mm M6 – M16
Tool holder ¼" hexagon
socket/

½"
Weight according to EPTA-
Procedure 01:2014 kg 1.7
Permitted ambient temperature
– during charging
– during operation
*
and during
storage
°C
°C
0 ... +45
–20 ... +50
Recommended batteries 0700 916 5..
Recommended chargers 0700 816
* limited performance at temperatures <0 °C
OBJ_DOKU-54268-002.fm Page 16 Friday, August 12, 2016 10:08 AM