Würth 0700 207, Перевод оригинальной инструкции по эксплуатации

Страница: 10 / 124

10
☞
For further notes on safety refer to enclosed Sheet
Safety warnings for sabre saws
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future
reference.
❏ Hold the power tool only by the insulated grip-
ping surfaces when performing an operation
where the cutting tool may contact hidden wir-
ing.
Contact with a “live” wire will also make ex-
posed metal parts of the power tool “live” and
shock the operator.
❏ Use clamps or another practical way to secure
and support the workpiece to a stable plat-
form.
Holding the workpiece by hand or
against your body leaves it unstable and may
lead to loss of control.
❏ Before each use, check the machine and battery. If
damage is detected, do not use the machine. Have
repairs performed only by a qualified technician.
Never open the machine yourself.
❏ Before any work on the power tool (e.g. main-
tenance, changing the tool, etc.), remove the
battery.
There is danger of injury from an acci-
dentally starting power tool.
❏ Before inserting the battery or transporting the
power tool, make sure that the machine is
switched off and the selector switch 5 is in the
centre position.
There is danger of injury from an
accidentally starting power tool.
❏
Use power tools only with specifically desig-
nated battery packs.
Use of any other battery
packs may create a risk of injury and fire.
❏ Convince yourself before using that the battery is
securely seated in the machine.
❏ When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
❏
When the cut is completed, switch off the
machine and then pull the saw blade out of the
cut only after it has come to a standstill (danger
of kick-back).
❏ Use only sharp, flawless saw blades. Replace
immediately cracked, bent or dull saw blades.
❏
When working, the guide frame
2
must always
be in contact with the workpiece.
❏
The machine must be operated only with the
associated protective devices.
❏
Always switch the machine off and wait until it
has come to a standstill before placing it down.
❏ Never allow children to use the machine.
Battery and Battery Charger
❏
The enclosed operating instructions for the bat-
tery charger must be read carefully!
❏ Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help.
Liq-
uid ejected from the battery may cause irritation
or burns.
❏
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
❏ Allow a heated battery to cool before charging.
Protect the battery from heat and fire:
Danger of explosion! Do not place the
battery on radiators or expose to strong
sun rays for a longer time; temperatures
over 50 °C cause damage.
❏ Do not open the battery, and protect it from
impact. Store in a dry and frost-free place.
❏ When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another.
Shorting the battery terminals together may
cause burns or a fire.
Warning! To avoid the risk of fire, personal injury,
or product damage caused by a short-circuit, do
not immerse the tool, the replaceable battery or
the battery charger into liquids, and ensure that no
liquids penetrate the tools and batteries. Corrosive
or conductive liquids such as salt water, certain
chemicals and bleach, or products containing
bleach can cause a short-circuit.
❏
Use only original Würth parts and accessories.
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions con-
tained therein are strictly followed.
In addition, the general safety
instructions in the enclosed booklet must be fol-
lowed.
GB
SBS 28 A.book Seite 10 Freitag, 8. März 2019 8:39 08