7
f.
Press SAVE on right side of display before exiting.
g.
To restore line status display, just toggle 0 back to 1.
e.
Programmable line name and extension
i.
Line names and extension numbers are all programmable with a full
range of alphabet, 0-9, and special characters.
a.
To access this function, press MENU button on left side of
display.
b.
Scroll down until LINE NAMES is highlighted.
c.
Press SELECT to begin changing line names.
i.
Highlight the value you would like to change by
pressing the < (LEFT) or > (RIGHT) arrow key.
ii.
Change the value by pressing the ^ (UP) or v (DOWN).
iii.
Continue these steps until you have reached the
desired designation for this line, and then press SAVE
to store values.
d.
Press BACK to return to previous menu or EXIT to return to
home screen.
f.
External line display (RESERVED FOR FUTURE RELEASE)
i.
The external lines can be configured to be displayed or hidden from user.
a.
Press MENU button on the left side of display.
b.
Scroll down until you have highlighted PREFERENCES.
c.
Press SELECT to access preferences menu.
d.
Scroll down to highlight EXTERNAL LINES and press SELECT.
e.
1 will toggle to 0, turning off external line display.
f.
Press SAVE on right side of display before exiting.
g.
To restore external line display, just toggle 0 back to 1.
5.
Initial tests
1.
To make sure you have a good telephone line, you can make an outside call from
the Command Center using the keypad. This is a good time to verify emergency
numbers also.
i.
Lift handset or press SPEAKER ON/OFF.
ii.
Press 9, 9, then the number you wish to dial. If the line is good, you will be
able to connect to an outside line. If the line is bad, or not connected, you
will get a busy tone.
iii.
Return handset to receiver or press SPEAKER ON/OFF (if phone was on
speaker).
