General installation manual lever
• Revision: 01 • 10/11/2021 •
© ABM Fahrzeugtechnik GmbH
Page 4 of 6
Indian Springfield and Chief with KH74
Loosen the clutch cable at the adjusting nuts.
Completely remove the original lever.
Clip the clutch cable into the new lever and attach as the
original. Moisten all sliding surfaces with grease.
Set the clutch backlash at the cable using the adjusting
nuts as per original.
Indian Scout with KH67 and FTR with KH70
Press the bushing provided into the adapter.
Next, mount the clutch lever as per original. Moisten all
sliding surfaces with grease.
BMW R18 with BH48/KH73
Completely remove the original lever.
Caution: When disassembling the original lever, make
sure that under no circumstances should the brake or
clutch piston be pulled out of the cylinder with the
thrust pin.
The original collars must not be removed.
Remove the bushing from the original lever and push into
the adapter with grease.
