General installation manual lever
• Revision: 01 • 10/11/2021 •
© ABM Fahrzeugtechnik GmbH
Page 3 of 6
General notes
Disassemble the original levers from the vehicle.
Compare the original lever with each new lever.
Add all necessary small parts (e.g. bushings), unless they
are included in the delivery, for the new lever.
Triumph Rocket 3 with BH47 and Indian FTR with BH11
Use the mandrel provided (see image) to dismantle the
original lever.
Mount the greased original thrust pin in the new adapter and
install the lever.
It is imperative to reset the freeplay (see workshop
manual).
Always heat the thread pin for setting (thread-locking
fluid).
Indian Scout with BH45
Press the bushing provided into the adapter.
Heat the thread pin with a heat gun, remove it from the
original lever and screw it into the new adapter (using
thread-locking fluid).
Mount the lever and screw the pin into the adapter until
it lightly touches the brake piston.
Indian Springfield with BH49 and Chief with BH50
Completely remove the original levers.
Insert the new brake lever and attach as the original.
Moisten all sliding surfaces with grease.
