WUNDER SA.BI.SRL EN USER MANUAL
RA(WU150) REV. 02- 10/01/2017
8
Figure A
Assembly is easy: fix scale's column to the weighing platform
(See Figure A)
ATTENTION!
FOLLOW THE INDICATIONS BELOW BEFORE INSERTING THE
COLUMN
Figure B
Figure C
•
Overturn the weighing platform resting it onto a level
surface.
•
Remove the display connector from inside the column
and connect it to the weighing platform connector,
making it pass through the hole indicated by the red
arrow (see Figure B).
•
Fix the column to the weighing platform support using
the 4 supplied screws.
(see Figure C).
•
Position the instrument on the floor and adjust the 5
feet to it.
•
To use, connect the supplied external power supply to
the current (see battery operation)
7. INSTRUCTION FOR USE
7.1 Instruction for charging and connecting
If
prompt displays on the LCD, please charge the scale with exclusive adaptor.
Locate adaptor plug on the rear side of indicator.
The battery should be recharged at least every 3 months regardless if it is used or not. After a long period
in storage, e.g. over 3 months, the battery should run a full cycle (charge/discharge) to allow it to restore to
full capacity.
Ac Jack connector
