User Manual
9
Video/ Power Interface
Quick Start Guide
1. Insert a fully charged battery into the camera
2. Power on the camera and uncover the lens cap after 15 seconds
3. Adjust the two OLED viewfinders to a satisfying extent
4. Adjust focus till getting a clear live image
5. Use the buttons to adjust imaging performance or get position information
6. Press button C to perform non-uniformity calibration when necessary
7. Power off the camera and remove the battery
8. Store the whole system in good conditions
Operating the System
Powering on the camera
Power on the GUIDIR
®
IR529 camera, the boot screen image below will appear immediately.
