User Manual
11
imaging performance, excluding Option GPS and Option Compass; status options to indicate the
camera position, including Option GPS and Option Compass.
y
Pressing button M can toggle between each option
y
To highlight an option, release button Menu immediately
y
When a function option is highlighted, pressing or – can change its value; when a
status option is highlighted, pressing or – can enter its sub menu.
Note:
y
When the above menu is displayed on the live image and no further operation is carried
out in 30 seconds, the menu will disappear from and the battery status icon will appear
in the image, but sub menus of option GPS and Compass will never disappear.
y
To change the value of options B and C, you need to firstly change option A to switch to
the mode under which changing B or C value is available.
Introduction to Menu Options
Option Abbreviation
Option
Function
B
Brightness Display offset value of the live image
C
Contrast
Display gain value of the live image
A
Auto
Display auto or manual mode of the offset & gain control
Z Zoom
Display
electronic
zoom of the live image
P
Palette
Display number of the currently used palette
GPS
GPS
Display the current position information captured by GPS
Compass Digital
compass
Display the current position information captured by digital
compass
Controlling Brightness and Contrast
Three modes are available to control brightness and contrast of the live image, which is indicated
by option A. Adjusting the value of option A can switch between the three modes.
Mode
Displayed Menu Option
Control Mode
A: 0
Offset O:***, Gain G:***
Manual offset & Manual gain
Manual mode to control both offset and gain.
A:1
Brightness B:***, Gain G:***
Auto offset & Manual gain
Auto mode to control offset and manual mode to
control gain.
A:2
Brightness B:***, Contrast C:***
Auto offset & Auto gain
Auto mode to control both offset and gain.
Remark:
y
Brightness: The expected average brightness of the live image
