background image

                                                                                                                                       

User Manual

 

 

13 

 

 

 

 

 

Press 

 or 

 

to choose AutoSpan1 or AutoSpan2. 

Press 

 to enter manual adjust mode, then press 

 or 

 

to increase/decrease the value of 

Tmax and Tmin, the picture effect will change accordingly. 

     

Press button T to finish operation and return to real-time IR mode

 

 

Main menu operation 

On the non-menu mode, press 

  to bring up Main menu, the following info will be displayed on the screen

 

 

Parameter

File Setup 

 

 

 

Press T in the main menu to return real-time IR mode

 

 

y

 

On the main menu mode, press 

  to enter sub-menu of parameter setting:   

 

Emiss

 

Tamb

 

Distance

 

Palette

 

RelHum

 

Laser

 

Brightness

 

 

 

OK

 

On the sub-menu mode, press 

  to confirm selecting the highlighted option and enter the next sub-menu, press 

T to exit main menu operation and return to real-time IR mode. 

y

 

On the main menu mode, press 

  to enter file operation sub-menu : 

y

 

 

Filelist

 

Del All

 

Video

 

Storage

 

Help

 

Содержание GUIDE EasIR-9


























Отзывы: