wtw pH 7310, Руководство по эксплуатации, Страница: 51 / 72

pH 7310 Data storage
ba75929e02 10/2011
51
Quitting the display To quit the display of stored measurement datasets, you have the following
options:
 Switch directly to the measured value display with <M> .
 Quit the display and move to the next higher menu level with <F1> / [Back] .
8.3.2 Erasing the measurement data storage
Erasing the measurement data storage (see section 8.3.1 E
DITING THE
MEASURED VALUE STORAGE
, page 49).
8.3.3 Measurement dataset
A complete dataset consists of:
 ID number
 Date/time
 Measured value of the connected sensor
 Measured temperature value of the connected sensor or manually set tem-
perature
 AutoRead info: The AR indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no
AR indicator.
 Calibration evaluation: +++, ++, +, -, or no evaluation
8.3.4 Storage locations
The pH 7310 meter has two measurement data storages. The measured
values recorded either manually or automatic are stored separately in indi-
vidual measurement data storages.
Storage Maximum number of datasets
Manual data storage 500
Automatic data storage 5000