wtw DIQ/S 282, Руководство по эксплуатации, Страница: 124 / 186

Outputs DIQ/S 28X
124
ba77168d02 03/2017
7 Outputs
7.1 Outputs of the System 28X
Functioning of the outputs
 Relay outputs work as openers or closers.
 Current outputs provide a current depending on the measured value.
Current outputs are available in the variants DIQ/S 28X-CRX and when an
extension module with current outputs is used).
On the DIQ/S 28X you can do the following:
 Assign names for the outputs (see section 7.3).
 Link outputs with sensors (see section 7.4)
 Erase links between outputs and sensors (seesection 7.5)
 Set up outputs (see section 7.6 and section 7.7)
 Check the conditions of the outputs (see section 7.8)
Basis information on the use of relay outputs is given in section 7.2.
Functions for
current and relay
outputs
Relay output (see section 7.6)
 System monitoring
 Sensor monitoring
 Limit indicator
 Frequency controller
 Pulse-width output
 Cleaning
 Sensor-controlled
 Manual control
 Alarm contact
Current output (see section 7.7)

Recorder
 PID controller
 Fixed current value