wtw Cond 3210, Руководство по эксплуатации

Страница: 20 / 48

Operation Cond 3210
20 ba75794e07 07/2017
4.2.4 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indi-
cated in the status line of the measured value display.
When storing measured values and calibrating, the current date and
time are automatically stored as well.
The correct setting of the date and time and date format is important for
the following functions and displays:

Current date and time

Calibration date

Identification of stored measured values.
Therefore, check the time at regular intervals.
Note
The date and time are reset to default after a fall of the supply voltage
(empty batteries).
Setting the date, time
and date format
The date format can be switched from the display of day, month, year
(
dd.mm.yyyy ) to the display of month, day, year ( mm/dd/yyyy or
mm.dd.yyyy ).
7 Open the setting mode for the Language with <ENTER> .
8 Select the required language with <

><

> .
9 Confirm the setting with <ENTER> .
The meter switches to the measuring mode.
The selected language is active.
Language: Deutsch
Illumination
:
On
Contrast
:
48 %
Switchoff time
:
30 min
General
15.03.2014
10:00
Back