wtw Cond 3210, Руководство по эксплуатации

Страница: 16 / 48

Operation Cond 3210
16 ba75794e07 07/2017
4.2 General operating principles
This section contains basic information on the operation of the
Cond 3210.
Operating elements,
display
An overview of the operating elements and the display is given in sec-
tion 1.1 and section 1.2.
Operating modes,
navigation
An overview of the operating modes and navigation of the Cond 3210
is given in section 4.2.1 and section 4.2.2.
4.2.1 Operating modes
The instrument has the following operating modes:

Measuring
The measurement data of the connected sensor are shown in the
measured value display

Calibration
The course of a calibration with calibration information, functions
and settings is displayed

Storing in memory
The meter stores the measurement data manually

Setting
The system menu or a sensor menu with submenus, settings and
functions is displayed
4.2.2 Navigation
Measured value display In the measured value display, you can

open the menu for calibration and measurement settings with <F1>
(short keystroke)

Open the Storage & config menu with the sensor-independent set-
tings with <F1
_
> (long keystroke, approx. 2 s).

Change the display in the measurement window by pressing <M>
(e.g. conductivity
−>
resistivity
−> −> −>
).
Menus and dialogs The menus for settings and dialogs in procedures contain further sub-
elements. The selection is made with the
<

><

> keys. The current
selection is displayed with a frame.

Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with
<ENTER> . Exam-
ple: