wtw Cond 1970i, Руководство по эксплуатации

Страница: 10 / 67

Safety Cond 1970i
10 ba75692e02 07/2009
2.2 General safety instructions
This instrument is built and inspected according to the relevant guide-
lines and norms for electronic measuring instruments (see chapter
7 T
ECHNICAL DATA
).
It left the factory in a safe and secure technical condition.
Function and operating
safety
The smooth functioning and operational safety of the measuring instru-
ment can only be guaranteed if the generally applicable safety mea-
sures and the specific safety instructions in this operating manual are
followed during operation.
The smooth functioning and operational safety of the measuring instru-
ment can only be guaranteed under the environmental conditions that
are specified in chapter 7 T
ECHNICAL DATA
.
If the instrument was transported from a cold environment to a warm
environment, the formation of condensate can lead to the faulty func-
tioning of the instrument. In this event, wait until the temperature of the
instrument reaches room temperature before putting the instrument
back into operation.
Safe operation If safe operation is no longer possible, the instrument must be taken out
of service and secured against inadvertent operation!
Safe operation is no longer possible if the measuring instrument:
z
has been damaged in transport
z
has been stored under adverse conditions for a lengthy period of
time
z
is visibly damaged
z
no longer operates as described in this manual.
If you are in any doubt, please contact the supplier of the instrument.
Obligations
of the purchaser
The purchaser of the measuring instrument must ensure that the fol-
lowing laws and guidelines are observed when using dangerous sub-
stances:
z
EEC directives for protective labor legislation
z
National protective labor legislation
z
Safety regulations
z
Safety datasheets of the chemical manufacturers.