WTI MT5634, Руководство пользователя

Страница: 7 / 36

2-1
2. AT Command Summary
Organization of AT Commands on the following pages: 1st, by the initial
command character (&, +, %), 2nd, alphabetized by the second command
character (Except for listing of AT).
Command Description
AT Attention Code
A Answer
A/ Repeat Last Command
B n Communication Standard Setting
D s Dial
DS= y Dial Stored Telephone Number
E n Echo Command Mode Characters
F n Echo Online Data Characters
H
n
Hook Control
I n Information Request
M n Monitor Speaker Mode
N n Modulation Handshake
O n Return Online to Data Mode
P Pulse Dialing
Q
n
Result Codes Enable/Disable
S r = n Set Register Value
S r ? Read Register Value
T Tone Dialing
V n Result Code Format
W n Result Code Options
X n Result Code Selection
Z n Modem Reset
&C n Data Carrier Detect (DCD) Control
&D n Data Terminal Ready (DTR) Control
&E n XON/XOFF Pass-Through
&F
n
Load Factory Settings
&G n V.22bis Guard Tone Control
&K n Flow Control Selection
&L n Leased Line Operation
&P n Pulse Dial Make-to-Break Ratio Selection
&Q n Asynchronous Communications Mode
&S
n
Data Set Ready (DSR) Control
&T n Loopback Test (V.54 Test) Commands
&V Display Current Settings
&W n Store Current Configuration
&Z y = x Store Dialing Command
\A n Select Maximum MNP Block Size