WTI MT5634, Руководство пользователя, Страница: 24 / 36

3-16
MT5634 Modem; AT Command Set
Command: #CBS n Callback Enable/Disable
Values: n = 0, 1, 2, or 3
Default: 0
Description: #CBS0 Disables callback security.
#CBS1 Enables local and remote callback security.
#CBS2 Enables remote callback security only.
#CBS3 Disables callback security until local hang-up or reset.
Command: #P n Set 11-bit Parity
Values:
n
= 0 or 1
Default: 2
Description: #P0 No parity.
#P1 Odd parity.
#P2 Even parity.
Command: #S x Enter Setup Password
Values:
x
= password (1–8 characters, case sensitive)
Default: MTSMODEM
Description: Enters the remote configuration setup password.
Command: #S=
x
Store Setup Password
Values: x = password (1–8 characters, case sensitive)
Default: MTSMODEM
Description: Stores a new remote configuration setup password.
3.1 Escape AT Commands
Command: +++AT<CR> Escape Sequence
Values: N/A
Description: Puts the modem in command mode (and optionally
issues a command) while remaining online. Type
+++AT and up to six optional command characters;
then press [Enter] . Used mostly to issue the hang-up
command:
+++ATH<CR>
.
Command: %%%ATMTSMODEM<CR>
Remote Configuration Escape Sequence
Values: N/A
Description: Initiates remote configuration mode while online
with remote modem. The remote configuration
escape character (%) is defined in register
S13
.