MReX-5B Transmitter User Manual v2.07 Firmware
6.25 kHz Channel Space Settings
a = 512 Baud 2 Level FSK
d = 4800 Baud 4 Level GFSK
<SPACE>
is a single space character.
MMM
... is the payload, up to 240 characters.
<CR>
is the carriage return character
Example:
To send a 512 baud alpha message to 1234567 level 1 with payload of “TEST”
WT1234567A10<SPACE>TEST<CR>
After processing/transmitting responds with:
WT[NNN]<CR>
where:
NNN is the number of characters from W until, but not including <CR> , the test message above
results in the following response
WT[017]<CR>
Support for Multiple Messages
The WT protocol allows for the same message to be sent to a variety of different radio types. This
allows for an efficient way to send to several different RIC codes or technology types. Many mes-
sage transmissions can be supported, until the max message length for the message is exceeded.
Example:
To send the message “TEST” to RIC codes 1234560 and 1222222 as a 512 baud POCSAG mes-
sage.
WT1234560A10
WT1222222A10<SPACE>
TEST<CR>
2 messages will be transmitted, batched in a single transmission.
© WTE Limited, 2020 – Christchurch New Zealand
Page 18 of 35
