34
Montage- und Betriebsanleitung
Installation and Operating Instructions
EN
The hydraulic chuck bears this warning sign.
Warning sign on the hydraulic chuck
Fig. 2:
Position of prohibition symbol and warning sign on the hydraulic chuck
Fig. 3:
Montage- und Betriebsanleitung
Installation and Operating Instructions
35
EN
3.5.1
General warnings and safety instructions
WARNING
Danger from use by untrained and unauthorised personnel!
The clamping of tools and their installation on a machine tool by untrained and unauthorised personnel can lead to haz-
ardous situations.
Only trained, authorised and dependable specialist personnel may clamp tools and install them on a machine tool.
The specialist personnel must be able to recognise and avoid hazards.
WARNING
Failure to observe the technical data!
Failure to observe the technical data can result in serious injury to the operator and in machine damage.
Observe the technical data given in chapter 4.4.
During clamping, screw in the clamping screw up to the stop, observing the specified minimum number of rotations.
Observe the prescribed values for the minimum clamping depth.
Observe the prescribed limit speeds for the machine-side connection.
Observe the maximum load limit for the machine-side connection in accordance with VDMA 34181, for example.
If irregularities occur during operation, do not use the hydraulic chuck further for safety reasons and send it to WTE
for inspection or repair.
