V3 © 2019 WT SHA DE
G18
GE
NERA
L
{T} 877.294.3580 • {F} 51
6.294.0444 • {E} inf
o@WTS
had
e.
c
om • 77 S
ec
ond A
ven
ue • Gard
en C
it
y P
ark, Ne
w Y
ork 11040
2. How to Install Brackets
IB Installations:
Using the window frame as a guide, determine the location you
will be installing the first bracket. If you will be adding fascia
(SoloMount style brackets only) be sure to leave enough room
in front so the fascia will be flush with the surface outside the
frame.
Using two screws, affix the bracket to the installation surface.
Ensure the screws are secure.
Follow the same process for the opposite side.
To ensure proper coverage, locate the center line of the space
in which you will be installing. Divide the FINISHED WIDTH of the
shade in half and use this measurement to locate where you
will install your first bracket.
Using two screws, affix the bracket to the installation surface.
Ensure the screws are secure.
Measuring from the OUTSIDE FACE of the first bracket, affix
the second bracket so that the distance between the OUTSIDE
FACES of both brackets is equal to the FINISHED WIDTH of the
shade. Use a level to ensure both brackets are even with each
other and perpendicular to the floor.
OB/FAB Installations:
1. Identifying Mounting Type and Location
Ceiling Mount
Jamb Mount
Wall Mount
Flange Adjustment
INSTALLATION INSTRUCTIONS -
™
Before installing anything, determine whether your shade is
Drive Right or Drive Left (location of the motor or clutch) and
identify each bracket in the pair. Be sure to install the correct
bracket for each side of the shade.
Drive brackets
Idler brackets
PRO TIP
OB MEASUREMENTS
IB MEASUREMENTS
FAB MEASUREMENTS
Before you begin, you must identify the proper
shade positioning with regard to the frame. Shades
ordered for Inside Bracket (IB) installations are
for mounting inside of the window frame. Shades
ordered for Outside Bracket (OB) installations are
for mounting outside of the window frame. FAB
shades should be treated as an OB installation.
WT Shade brackets come pre-set for your desired
Mounting Location (Ceiling/Jamb or Wall Mount). If this needs to be changed, all
SoloMount Brackets (and some Slim Brackets) can be adjusted by removing the
screws at the base of the Mounting Flange, and the Mounting Flange can then be
moved to the desired location. It can also be extended if you encounter an installation
that requires you to move the fabric or roller away from the ceiling or wall.
