Refer to the notes by the R/C equipment manufacturer!
Collapse the transmitter antenna fully and place it in the hands of a helper (never on the ground). Hold the
model high in your hands and walk away at least 150 ft. There must be no sporadic servo action within this
range, also when you turn the model around and point it into any direction.
19 Update via USB-Interface
If applicable the CS DataVoice may be updated to the latest software version with an USB Interface Cable
(identical to the UniLog Interface Cable from SM-Modellbau, item # 2550).
The latest software release and the update procedure is described on www.wstech.de/user.htm
20 Warranty
There is a 2 year warranty starting with the delivery and referring to the functions of the product described in
this manual. The warranty covers production and material failures. All further claims, particularly those
referring to personal and material damage and their consequences, are excluded. There is no warranty in
cases of inappropriate handling.
The defective goods have to be returned together with the invoice and appropriate postage.
21 Recycling Note
Old equipment which is marked with the above symbol must not be disposed of in the household garbage.
Return the equipment to the manufacturer for a appropriate disposal.
22 Safety Notes
The equipment must only be used for the applications described in this manual.
Also note the safety notes and manuals of equipment to which this equipment is connected to.
The manufacturer does not take any responsibility for either damages which occur during the use of this
equipment or any claims from third persons.
23 Technical Data
Technical Data of the Vario
Telemetry system for the data transfer from the model airplane to the pilot.
Telemetry transmitter frequency adjustable via R/C transmitter; transmitter completely off in standby mode.
LPD: Channel selection: 69 channels, 25 kHz apart from 433.075 MHz to 434.775 MHz
FRS: Channel selection: 14 channels,
Frequency shift: max. +/- 2.5 kHz
Bandwith: max. 18 kHz
Max.data rate: 6 kHz (limited by a 3 kHz low-pass filter)
Antenna: 17 cm flexible wire
Size: typical 65 mm x 25 mm x 12.5 mm
Weight: typical 27 g
Vario sensitivity: approx. 0.05 m/sec
Altitude range: - 400 m to 3,200 m in relation to sea level
Altitude resolution: typical 3 m
Integral vario at a 20 sec time base (time base adjustable in setup mode: 10 sec to 120 sec)
Receiver voltage announcement
Receiver voltage check and alarm (adjustable between 4.4 V to 6.0 V)
Speed announcement in km/h (only with GPS module)
Position announcement automatically approx. 2 min after landing (only with GPS module)
Announcement: English with female voice
Power supply: 4.5 V to 9 V DC from 4 to 5 NiXX-cells or 2-cell Lipos via 3-pole connector from the R/C
receiver
Supply current: typical 35 mA at 5 V, with GPS module: typical 80 mA. Transmitter off in standby mode:
current typical 15 mA.
