S-32
V3307-DI-T-E2B, WSM
ENGINE
Nozzle Holder
1. Remove the overflow pipe (1).
2. Remove the nozzle holder clamps (2), nozzle holder assembly
(3) and nozzle gaskets.
(When reassembling)
• Be sure to place the nozzle gaskets and the O-rings (4).
W1049737
Rocker Arm, Push Rod and Valve Bridge Arm
1. Remove the rocker arm (1) as a unit.
2. Remove the push rods (2).
3. Remove the valve bridge arm (3).
(When reassembling)
• When putting the push rods (2) onto the tappets, check to see if
their ends are properly engaged with the grooves.
• When installing the valve bridge arm (3), apply engine oil to the
valve bridge shaft sufficiently and check whether to move
smoothly.
IMPORTANT
Q
• After reassembling the rocker arm (1), be sure to adjust the
valve clearance. See the “Valve Clearance“.
W1050212
Tightening torque
Nozzle holder clamp screw
24 to 27 N·m
2.4 to 2.8 kgf·m
18 to 20 lbf·ft
Overflow pipe assembly
retaining screw
9.81 to 11.2 N·m
1.00 to 1.15 kgf·m
7.24 to 8.31 lbf·ft
(1) Overflow Pipe
(2) Nozzle Holder Clamp
(3) Nozzle Holder Assembly
(4) O-ring
Tightening torque
Rocker arm bracket
screw
49 to 55 N·m
5.0 to 5.7 kgf·m
37 to 41 lbf·ft
(1) Rocker Arm
(2) Push Rod
(3) Valve Bridge Arm
KiSC issued 01, 2009 A
