Page.5.
Optical power meter, test fiber loss and value *
(Optional)
Digital Multi-meter , DC and AC voltage measurement, Resistance measurement Continuity test,
Diode measurements, Capacitance measurement *
(Optional)
Video level meter PEAK video signal level, SYNC signal level, Color burst chroma level
measurement,test video signal attenuation *
(Optional)
Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the
connected cable from messy cables *
(Optional)
Ping test, PING is the most conventional network debugging tools; it is used for testing if the
connected IP camera or other network equipment’s Ethernet port is working normally and the IP
address is correct.
In digital IP surveillance applications, if the IP camera’s IP address is not known; the device
cannot be used. An IP address scan can quickly search for the connected IP camera or other
network device’s IP address.
The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an
IP camera
TDR cable test, test cable open circuit and short-circuit *
(Optional)
Cable test , Test LAN cable or telephone cable,UTP cable etc ,cable type and the sequence of
wires will be displayed
Support RS232/RS485,rate 600
～
115200bps adjustable
PTZ protocol analysis, control protocol command displays to check RS485 transmission
whether is normal, easy to find the fault device
PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
sets and the preset position
DC5V 2A power output for USB charging (No USB data exchange, voltage only)
PoE power output, supply temporary power for PoE camera
DC5V 2A power output, as a power bank
Audio input and output, test and output the audio signal
7.4V Lithium Ion Polymer Battery ,Working time lasts 10 hours, after charging for 5 ~6 hours
Содержание IPC-4300 Plus
Страница 1: ...IP camera tester User Manual V01 00 ...
Страница 12: ...Page 7 2 4 Function interface ...
