Wright Velke HYDRO PISTOL GRIP, Инструкция по эксплуатации

Страница: 28 / 44

28
Assembly
hole
Threaded
Removal
holes
Assembly
hole
6.9 Cutting Blades
In order to maintain the best cut, it is important that the blades are well sharpened and not damaged.
Bent or cracked blades or blades with large nicks need to be replaced. Blades must be balanced after
sharpening.
To change the blades:
1. Stop engine, remove the key and wait for all moving parts to stop.
2. Engage the parking brake.
3. Lift the front of the mower and secure in the raised position with
jack stands.
4. Remove the deck cover.
5. While securing the bolt head under the deck, remove the nut from
the top of the spindle by rotating clockwise.
6. Install new or re-sharpened blade. (Ensure the blade spacers are
reinstalled with the same qty and location)
7. Torque nut to 70-80 ft lbs.
6.10 Spindle and Drive Pulley Split hub R&R
•
Remove 2, ¼” bolts from split hub and install in threaded holes in hub.
•
Slowly tighten each bolt, alternating as you tighten bolts against the pulley.
•
The hub will separate from the pulley.
•
Replace grade 8 bolts and install in reverse order using the assembly holes to tighten hub onto
pulley and spindle shaft.
Tightening will
separate the
hub from the
pulley