Wright Velke HYDRO PISTOL GRIP, Инструкция по эксплуатации

Страница: 23 / 44

23
WARNING
WARNING
5.3 How to Stop and Park the Mower
Come to a complete stop. Make sure the steering brake levers are in the neutral position with the neutral
latches engaged with the levers. If the blades are on, turn them off using the switch on the instrument
panel. Place the speed control lever in the neutral position, set the parking brake, reduce the engine
speed to idle, shut off the ignition switch to stop the engine and then remove the key from the ignition
switch. The mower is now parked. Do not leave unit parked unattended without engaging the parking
brake and do not leave the unit parked unattended on a sloped surface.
5.4 How to Drive the Mower Over a Curb
To climb a curb, first see the Safety Instructions section of this manual, especially the parts on:
•
Initial Operating Safety Guidelines
•
Operation In Reverse
•
Operation In Forward Direction
To drive up and over a curb turn the blades OFF and then proceed forward to the curb, lift the front
wheels off the ground by pushing down on the handlebar and move slowly forward allowing the front
wheels to rest on the ground beyond the curb. Then proceed slowly while driving the rear wheels over the
curb. To drive over and down a curb proceed slowly forward to the curb and allow the front wheels to
slowly roll off of the curb and down to the ground below the curb. Then move slowly forward until the rear
wheels roll over the curb and down to the ground below. NEVER stand on the Velke (sulky) while driving
over a curb.
5.5 Mowing on Varying Terrain
See the Safety Instructions section of this manual, especially the parts on:
•
Initial Operating Safety Guidelines
•
Operation On Slopes
•
Operation In Reverse
•
Operation In Forward Direction
•
Operation During Zero-Radius Turns
5.6 How to Adjust the Speed
Set the desired travel speed by moving the control lever forward or backwards.
Neutral Locked Position
Brake OFF
Neutral Position
Brake ON
Fast
Slow