Wren V3UP, Руководство по установке

Страница: 11 / 65

English
21
20
Steps 10-14, next page
Choose “Set-Up New Device” on the
Play-Fi App Setup screen.
Exit the Play-Fi App
and select WiFi in the
Settings app on your
iOS device.
In the drop-down list of networks,
select the option with the words
“PlayFiDevice.”
Launch the Play-Fi App on your iOS
device. After about 5 seconds, you will
get the Setup screen.
Make sure your V3US’s WiFi indicator is
amber and pulsing slowly. If this is not the
case, make certain that your V3US is turned
on (the Power button will be lit white) and
that your source is set on WiFi. Then press
and steadily hold down the Setup button
on the rear panel until the amber light is on
and pulsing slowly
(about seven seconds).
Follow the Play-Fi App’s instructions
on your iOS device’s screen or refer
to the step-by-step instructions that
follow below.
Settings
The Play-Fi App for iOS devices can be used to setup your speaker(s) on your network.
The Play-Fi WiFi Setup enables you to set up multiple speakers at once. For Best results,
place the speaker(s) near your router. You can move the speaker(s) after setup is
complete.
Once you have completed this setup procedure, you can stream music to your V3US
using AirPlay on your iOS device(s). In addition, you can use the Play-Fi App on your iOS
device(s) to stream music to multiple V3US speakers on your network.
Download and install the free Play-Fi
App (search for “Play-Fi”) from the
Apple App Store.
Before you proceed, make sure you
know the name of the WiFi network
you wish to use if you have more than
one network; it is also important to
note upper and lower case as well as
spacing and the use of any special
characters (e.g., “Asus_3b”). Make
sure you also know your network
password if you have one.
Turn on your speaker(s). The first
time you turn on the Wren V3US, it
will start up in WiFi Connect Mode
(indicated by the WiFi indicator
blinking amber). In this mode, the
speaker is broadcasting a signal
telling iOS devices that it is ready
to connect.
Steps 10-14, next page
Connect using iOS Devices with the
Play-Fi iOS App
amber
* IMPORTANT: To download the Play-Fi App for Apple iOS devices from the Apple App Store, search using the term
"DTS Play-Fi." DO NOT download the app titled "wrensoundsystemv5ap", as it is designed to work with the Wren
V5AP and will not work with your speaker.