Wren 700 WALL, Инструкция по сборке

Страница: 10 / 12

For Internal Use: FI.WR.INS.035_WKIN00125_MULTI_700-800_WALL_ShallowBASE_Rev6.indd
Page 9
WALL/SHALLOW
BASE UNIT
700 - 800
WALL/SHALLOW BASE
Assembly Guide
Step 25.
Insert hinge in top & bottom
holes as shown.
Step 26.
Secure hinges by tightening
2 x screws with hinge dowels
attached. These are already
positioned within the hinges.
Step 27.
Attach the door to unit
where required.
To attach door
clip hinge onto hinge
plate and click to secure.
Step 28.
Adjust hinge to suit. As shown below.
View from Inside of Carcass
To adjust hinge using a screw
driver, tighten or loosen as
required at points
1 & 2 .
Point 1 - In - OUT
Point 2 -Left - Right
1
2
FRONTAL HINGE
ADJUSTMENT
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.
To Release door
Pull catch as shown,
to release hinge
from the hinge plate.
View from Inside of Carcass
Step 29.
Fit cover caps to hinge.
Adjust Softclose to suit.
Hinge Cover Caps
Hinge Plates