For Internal Use: FI.WR.INS.035_WKIN00125_MULTI_700-800_WALL_ShallowBASE_Rev6.indd
Page 5
WALL/SHALLOW
BASE UNIT
700 - 800
WALL/SHALLOW BASE
Assembly Guide
Step a
Insert Hanging
Bracket
into pre-drilled holes
Step 13.
Hanging Brackets steps a,b & c to be carried
out on both sides as shown
WALL CABINETS ONLY
Step c
Secure with provided
2 x 20mm screws
(S)
per bracket
Step b
Rotate locking
lever 180 degrees
S
S
Detail A
Detail A
Detail A
Step 14.
Secure Corner Gussets
to the bottom left and
right hand side of the
wall unit using
4 x 15mm screws
(L)
per plate.
L
L
L
L
Detail B
Pilot
hol
e
M
Detail B
Step 15.
Drill a small pilot hole through the centre of the Corner Gussets.
Use this hole at the end of the process to screw through and
into the wall. Cover the screw heads using the cover caps
(M)
provided.
Screws for fixing to walls are not provided
as these vary
depending on your wall material and construction. Ensure
appropriate fixings for wall constructions are used.
A
B
for Shallow Base see pages 7 & 8
`
Care to be taken. Hanging procedure
is neccesary for a safe installation.
