Wren Kitchens WRWC30BKED, Руководство пользователя

Страница: 13 / 20

10
o
You should be careful to make sure that wine bottles do not touch the rear wall of the appliance, as this
can interrupt the automatic defrosting process and deflect water into the base of your wine cooler.
Removing the shelves for cleaning
o
Before cleaning your appliance,please make sure to remove all the shelves from the compartment.
Moving your wine cooler
If you need to move your wine cooler to another location you should follow the steps outlined below.
o
Remove all items from the wine cooler.
o
Securely tape down all loose items such as the shelves inside of the appliance.
o
Turn the adjustable foot up to the base to avoid damage.
o
Tape the door closed.
o
Ensure the appliance stays secure in the upright position during transportation. Also protect the outside of
the appliance with a blanket or similar item.
Power failure
o
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened.
o
If the power is going to be off for a longer period of time, you need to take the proper steps to protect the
contents.
IMPORTANT: If the appliance is unplugged, the power is lost or turned off you must wait 3 to 5 minutes before
restarting the wine cooler. If you attempt to restart before this time delay, the wine cooler will not turn on.
Vacation time
Short holidays: Leave the wine cooler in operation for holidays of less than 3 weeks.
Long absences: If the appliance will not be used for several months, remove all items, turn off the appliance and
unplug the electricity cable. Clean and dry the interior thoroughly. To prevent odour and mould growth, leave the
door open slightly by blocking it open if necessary.
Installation
IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the
frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home.
The rating plate can be found on the front left edge of the inside of the wine cooler.
The manufacturer declines all responsibility in the event of the installer failing to observe all the accident
prevention regulations in force, which are necessary for normal use and the regular operation of the electric
system.
Electrical connection
YOUR WINE COOLER IS INTENDED FOR FITTED AND PERMANENT INSTALLATION.
We recommend that the appliance is connected by a qualified electrician, who is a member of the
N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.