Wren Kitchens WRWC30BKED, Руководство пользователя

Страница: 14 / 20

11
Positioning
o
It is advisable that your appliance is only installed in a location where the ambient temperature of the
room, corresponds with the climate classification that is stated on the rating plate of your appliance. Your
appliance may not function correctly if the ambient temperature falls outside of the following ranges.
Climate classification Appropriate ambient temperature
SN +10 to +32 degrees centigrade
N +16 to +32 degrees centigrade
ST +18 to +38 degrees centigrade
T +18 to +43 degrees centigrade
o
Positioning the appliance requires two people in order to avoid injuries or damage to the appliance.
o
Your appliance should not be located in direct sunlight or exposed to continuous heat or extremes of
temperature (e.g. next to a radiator or boiler). If this is not feasible, then you should install an insulation
plate between the appliance and the adjacent heat source.
o
You should check whether there is an electrical socket available, which will be accessible after your
appliance is installed.
o
Place the appliance flatly and firmly on a solid base. The appliance is fitted with adjustable feet on the
front side, which should be used to level the appliance.
o
Be sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal
injury.
o
IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing should be placed in front
of this vent; otherwise your wine cooler may not operate properly.
Built-in installation
o
Your wine cooler can be used as a freestanding or a built in unit. The clearances shown in the above
drawing should be followed for both types of installation.
o
In particular the depth dimension must be observed.