background image

PIMT201

World Precision Instruments 

i

Copyright © 20

2

1

 

 by World Precision Instruments. All rights reserved. No part of this publication may 

be reproduced or translated into any language, in any form, without prior written permission of 

World Precision Instruments, Inc.

CONTENTS

ABOUT THIS MANUAL ................................................................................................................... 1
INTRODUCTION .............................................................................................................................. 2

Unpacking ................................................................................................................................... 2

MICROSCOPE SETUP ..................................................................................................................... 3

Setting up the Base and Stage .............................................................................................. 3

Installing the Condenser and Lamp Housing .................................................................... 7

Setting up the Stage and Phase Aperture ........................................................................10

Installing the Trinocular Head Assembly ...........................................................................10

Installing the Objectives ........................................................................................................12

Installing Adapter Plates, Eyepieces and Filters ..............................................................15

Phase Contrast Alignment ....................................................................................................18

Adjusting the Phase Contrast Alignment .....................................................................19

Mounting a Camera ................................................................................................................21

Direct C-Mount on a Threaded Triangular Attachment ...........................................21

Vertical Eye Tube Mounting ............................................................................................22

Eyepiece Mounting............................................................................................................22

Eyepiece Plus C-Mount Mounting .......................................................................................23

BASIC MICROSCOPE OPERATIONS...........................................................................................24

Camera Shutter (Optical) Path .............................................................................................24

Coaxial X-Y Control .................................................................................................................25

Micrometer Focus Control ....................................................................................................25

Focus Tensioning Adjustments ............................................................................................26

WARRANTY .....................................................................................................................................27

Claims and Returns ................................................................................................................27

Repairs .......................................................................................................................................27

Содержание PIMT201

































Отзывы: